User Manual

3
(1a)
http://start.redrockmicro.com
Tutorials, forums, customer support
HANDLEBAR ASSEMBLY
(2a)
(2b)
DSLR Baseplate
Handlebar Clamp
microFollow Focus
Lens Gear
9" Carbon Fiber
(CF) Rods
9" Carbon Fiber
(CF) Rods
1
(1b)
(3a)
(3b)
(3c)(3c)
4" Handlebar
Rod
4" Grip
Rod
Company:
Scene:
Pages: of
Date:
Title:
REDROCK MICRO
DSLR 2.0 Setup Guide
1
12.16.09
DSLR Captain Stubling Bundle
Steps needed for the Camera / DSLR Baseplate Assembly
1a: Attach appropriate set screw for Camera to Baseplate.
1b: Attach Camera to DSLR Baseplate
1
2
Steps needed for Lens Gear / Follow Focus / Camera Assembly
4a: Attach Lens Gear to Camera Lens
4b: Attach Follow Focus to CF Rods
4c: Attach Camera / DSLR Baseplate Assembly to CF Rods
HELPFUL HINT: Lens Gear and Follow Focus need to be aligned
properly. Make sure that Gear / Follow Focus / Camera
alignment is set appropriately
4
ASSEMBLY COMPLETED! NOW GO SHOOT!
5
Steps needed for CF Rods / Grip Rods / Hand Grip Assembly:
3a: Insert Carbon Fiber Rods into Handlebar Clamp
3b: Attach 4” Grip Rod to CF Rod
3c: Add Handgrips to both Handlebar Rod and Rear Grip Rod
set screw
Steps needed to assemble the Handlebar CLamp:
2a: Attach 4" Handlebar Rod to Handlebar Clamp.
2b: Thread Handlebar Clamp Tightening Screw
CAST REQUIRED:
create the cinema experience