User Manual

2x 18" Carbon
Fiber Rod
(Extended Option)
4x 9" Carbon
Fiber Rod
(Quick-Release Option)
ultraCage DSLR (Front)
4” Grip Rod
ultraCage Rear Chassis
2x 14" Carbon
Fiber Rod
OR
backPack
microFollowFocus | blue Studio
microMattebox
Double Top Handle and Thumbscrew
http://start.redrockmicro.com
Tutorials, forums, customer support
ultraCage | blue Studio BASIC Bundle Components
ultraCage | blue Studio DSLR SETUP GUIDE
REDROCK MICRO
Title:
Scene:
Company:
Pages: of
Date:
1
04.01.12
1
create the cinema experience
ultraCage | blue Studio Additional Options
D
A
C
B
E
F
G
H
E: Attach backPack to Rear Chassis.
F: Attach Top Handle. See above note.
G: Attach microFollowFocus | blue studio to rig.
H: Add a microMattebox to complete your rig.
ultraCage | blue Studio BASIC and DELUXE Bundles
ADDITIONAL OPTIONS
Note: when using Top
Handle, Triangle Thumb
screw replaces 1/4-20 x
3/8” screw at top of cage
into camera
microMount
with spud
A: Insert 14” Rods into top clamps of both front and rear cage.
B: Attach microMount to Grip Rod, then Grip Rod to rig. Attach an
external monitor (not provided) to microMount Spud.
C: QUICK RELEASE option: Insert four 9” Rods into ultraCage as shown.
This makes it easy to toggle between handheld and studio modes.
D: EXTENDED option: Insert 18” Rods into bottom clamps of ultraCage. For
studio mode, this provides maximum stability.