Redsbaby Bounce Instruction Manual
Contents General instructions Warranty information Warnings and safety precautions Features and components Assembly instructions Frame Brake component Rear wheels Front swivel wheels Bassinet and bumper Removing the bassinet and bumper Seat and bumper Basket Using your Redsbaby Bounce Folding and unfolding Engaging and releasing the brake Locking the front swivel wheels Adjusting the handle Using the 5-point safety harness Reversing and reclining the seat Reversing
General Instructions This document contains important information and must be kept for future reference. Please read thoroughly before commencing assembly and use of your Redsbaby Bounce. Incorrect assembly and use can be dangerous and result in serious injury or even death. There may be slight variations in the design of your product to that shown in the images of this instruction manual.
Warranty information 12 Month Warranty The Redsbaby Bounce and its accessories come with a 12 Month Warranty to cover against faults in materials and workmanship when your products are used under normal conditions, according to our user manuals and technical specifications. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
ensure you follow the assembly instructions, which can be found in the instruction manual and via our ‘How To’ Videos available at www. redsbaby.com.au. How To Make A Warranty Claim Send an email to info@redsbaby.com.au to notify us of your warranty claim.
Warnings and safety precautions Please read the following warnings and safety precautions thoroughly before using your Redsbaby Bounce. Incorrect assembly and use can result in serious injury or death. Always follow safety instructions for assembly, folding and use. Always ensure that your Redsbaby Bounce is correctly assembled and locks are engaged before use. After unpacking, immediately discard any plastic wrapping and packaging materials, as these can lead to a choking hazard.
with the Redsbaby Bounce. • Take care when used on stairs or escalators. • Do not use or leave the Redsbaby Bounce near open fire or exposed flame. • Brakes must always be applied when the Redsbaby Bounce is not moving. GENERAL SAFETY PRECAUTIONS: • When the vehicle is being folded and unfolded, there is potential for fingers or parts of the body to be injured and due care should be exercised.
Features and components 1 7 2 3 8 4 9 Sticker Label 55mm 10 4 11 5 12 6 7 13 8 14 1. Handle 2. Fold lock 3. Bassinet apron 4. Frame fold latches 5. Brake 6. Rear wheels 7. Canopy 8. Circular frame 9. Bassinet 10. Frame 11. Basket 12. Front swivel wheels 13. 5-point safety harness 14.
Assembly instructions Frame To release the frame from the folded position: 1. Place frame on the ground and position yourself behind the handle bar. 2. Pull back on the two frame fold latches located on either side of the frame simultaneously. 3. Holding the frame on either side of the disengaged frame fold latches, 1 gently lift the frame continuing until the frame locks into place. When the frame has been fully opened, you will hear and feel a firm ‘click’.
Rear wheels Fit the rear wheels on the axle housings located on either side of the rear brake component. You will hear and feel a firm ‘click’ when the wheels are locked in place. IMPORTANT: Ensure you check that the wheels are clicked in correctly by tugging them outwards. Failure to attach the wheels correctly will result in them falling off the pram while in use. To remove, simply press the button in the middle of the wheel to release.
1 2 PRESS THUMB HERE 3. Feed the top end of the bassinet lining into the circular frame by gripping one side of the edge and gently feeding into the frame channel. Stop when approximately 5cm of the edge has been fed into the frame. 4. Repeat this on the opposite side, again feeding in approximately 5cm of the edge into the channel. 5. Continue to slowly feed small sections of each side of the lining into the frame until the lining is completely in the channel. 6.
Removing bassinet and bumper 1. Remove the bumper by simultaneously pushing the buttons on either side of the bumper. 2. Remove the bassinet apron by unzipping. 3. Remove the bassinet mattress. 4. Remove the bassinet board by releasing the Velcro tabs at the top and bottom ends of the bassinet board and gently lifting out. 5. Release the Velcro tabs at the top end of the circular frame. 6. Grip both hands on either side of the top of the circular frame, wrapping your thumbs inside the frame. 7.
Assembling the seat and bumper WARNING: • Do not use this seat with any other models of stroller. • This seat is only approved for use with model: Redsbaby Bounce. • The maximum weight of a child that can be carried in this seat: 17kgs. 1. Take the fabric seat unit and stretch the head rest section over the top of the circular frame. 2. Pull the rest of the seat unit fabric tightly towards the bottom of the frame. Take the safety straps and hook over the side of the frame. 3.
Basket IMPORTANT: Maximum weight for items in the basket is 4.5kg. Note: Your Redsbaby Bounce will come with the basket assembled, except for the solid plastic lining/insert. 1. Fold the sides of the fabric basket over the basket rods at the bottom of the stroller frame. Secure by fastening the buttons on both sides. 2. Secure the toggles on all four corners by stretching the elastic around the stroller frame. 3. Place the plastic lining inside the basket.
Using your Redsbaby Bounce Folding and unfolding the Redsbaby Bounce frame WARNING: • Make sure children are clear of any moving parts when you adjust the Redsbaby Bounce, otherwise they may be injured. • Ensure the frame fold locks are engaged correctly before placing a child in the Redsbaby Bounce. To release the frame from the folded position: 1. Pull back on the two frame fold latches located on either side of the frame simultaneously. 3.
Safe lifting and carrying of the Redsbaby Bounce frame when folded IMPORTANT: Do not lift or carry the Redsbaby Bounce when a child is in it. IMPORTANT: Do not lift or carry the Redsbaby Bounce when fully assembled. Only lift and carry when folded. 1. Always lift and carry the frame using two hands. 2. Ensure the frame fold latches are engaged. Engaging and releasing the brake The brake is located between the rear wheels of the Redsbaby Bounce.
Using the 5-point safety harness WARNING: • Use the harness at all times. • When not in use disconnect shoulder straps from the waist strap and/ or buckle. The harness can form loops which may cause a strangulation hazard. Never leave a harness connected when not fitted to a child in the Redsbaby Bounce. IMPORTANT: For the safety of your child the 5-point safety harness must be properly fitted and adjusted. Follow the instructions and Figure 1 below. 1.
Reversing and reclining the seat IMPORTANT: Do not reverse or recline the seat when a child is in the seat. 1. To recline, press and hold both round buttons on the side of the seat and move into the desired position. When in place, you will hear and feel a firm ‘click’. 2. To reverse, remove the seat unit by pressing the rectaingular release buttons on either side of the seat unit and lift upwards. When the release locks are disengaged, you will hear and feel a firm ‘click’.
Accessories WARNING: • Do not use any accessories that are not designed for or compatible with the Redsbaby Bounce. IMPORTANT: The following accessories are only compatible with Redsbaby Bounce. Do not use with any other model of vehicle. Rain Cover IMPORTANT: Do not leave the rain cover on without the ventilation window on the front of the rain cover open. Note: The canopy must be attached to the Redsbaby Bounce before securing the rain cover.
Switch It! Reversible Seat Liner Remove the shoulder and crotch padding from the Bounce seat unit harness. Align the reversible seat liner on the Bounce seat unit. Feed the five point safety harness through the respective crotch, waist and shoulder strap holes. If desired, replace the shoulder and crotch padding. Smoooth! Air Tyres Note: Accessory sold separately Fit both tyres on the axle housings located on either side of the rear brake component.
Maxi-Cosi Capsule Adaptors - Travel System Note: Accessory sold separately Securing the adaptors to your L Redsbaby Bounce chassis 1. Ensure your chassis is assembled correctly by following the instructions R in your Redsbaby Bounce Instruction Manual. 2. Stand behind your Redsbaby Bounce handle bar, and click the adaptor marked with the ‘R’ symbol into the right-hand side, with the ‘R’ symbol facing outwards. You will hear and feel a FIGURE 2 firm ‘click’ when the adaptor is in place. 3.
To remove your Maxi Cosi adaptors from your Redsbaby Bounce chassis: 1. Press the grey release buttons on each adaptor. When the release locks are disengaged, you will hear and feel a firm ‘click’ and you can lift them upwards to remove.
Product care IMPORTANT: Ensure you follow the regular maintenance and care instructions. Pay special attention to maintenance and care of the brakes. General Maintenance • Regularly inspect the locking devices, brakes, harness assembly, catches, seat adjusters, joints and fixings to ensure they are secure and in full working order.
YOUR REDSBABY BOUCE ©Copyright 2014 Redsbaby 24
