User Manual

ManualsBrandsRedzeo ManualsEarbud HeadphonesNeckband Bluetooth Headphones w/ 30hrs Playback, Wings Foldable Wireless Headset Retractable Earbuds, Around The Neck in Ear Earphones w/Noise Cancelling Microphones, Work from Home, Office, Commute

×1×1

Bluetooth connection steps

Pair the headset with 2 devices

Call

Power ON / OFF

×1×1 ×1

（Size M is preinstalled on earbuds）

MODEL: BH462A

NECKBAND WIRELESS EARPHONES

WINGS

Package List

We are appreciated for purchasing our Wings. This

guide contains instructions for setting up and using your

Wings easily.

Diagram

MFB

Volume- / Previous Volume+ / Next

ON/OFF

Multifunction Button(MFB)

Earbuds Retract Button(L)

Earbuds Retract Button(R)

Charging Port

LED indicator

Microphone

How To Pair

1. Keep your headset and device as close to each other

as possible, less than 1 meter is better.

2. Switch to “ON”, wait for few seconds, the LED will ﬂash

red and blue alternately, which means that it is ready

for pairing.

3. Turn on Bluetooth on your device and ﬁnd the headset’s

name “Wings”.

4. Click “Wings”, Bluetooth headset will get connected

with your device automatically. Input 0000 if it requires

a password.

1. After successfully pairing with one device, turn off the

Bluetooth of the device and switch the button of

“Wings” to “OFF”.

2. Follow the same steps as above to get your 2nd device

paired with the Bluetooth headset.

3. Turn on the Bluetooth of the 1st device, and then

choose “Wings” .

4. Now, both devices have been connected with Wings.

Note:

1. The headset will automatically reconnect to the

last-time paired and used device.

2. If it does not automatically reconnect, you can delete

"Wings" on the Bluetooth list of your device, and

then re-pair.

Settings

DEVICES

Bluetooth

Settings

DEVICES

Connected

Bluetooth

Wings

Range < 1m

ON OFF

Hold on 1s

Click Once

Redial / Mute

Siri / Music / Volume

Hold on 1s

Redial

Notiﬁcation

Please fully charge it if it was going to lay idle for a long

time and place it in a cool and dry place. Please recharge

it each 2 months for storage.

Please fully charge it for the ﬁrst use.

Charge

Tips

Reset

Output : 5V

Click Once

Hold on (1-2s)

When the earbuds are on, simultaneously press and hold the volume

up button and MFB button for 5 seconds. The LED will be steady on

for 2 seconds, which means it is reset successfuly.

Hold on 5s

Charging

100%1%

CORRECT DISPOSAL OF THIS PRODUCT

( Waste Electrical& Electronic Equipment )

This Marking shown on the product or its literature,indicate

that it should not be disposed with other household wastes

at the end of its working life.

To prevent possible harm to the environment or human health

from uncontrolled waste disposal, please separate this from other

types of wastes and recycle it responsibly to promote the

sustainable reuse of material resources.Household user should

contact either the retailer where they purchased this product, or

their local government oce, for details of where and how they

can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms

and conditions of the purchase contact. This product should not be

mixed with other commercial wastes for disposal.

(1) This device may not cause harmful interference, and (2) this

device must accept any interference received, including interference

that may cause undesired operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth

for an uncontrolled environment.

FCC STATEMENT

Any Changes or modiﬁcations not expressly approved by the party

responsible for compliance could void the user’s authority to

operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(Standby / Music)

(Call mode)

Click Once

Siri

Double click

Mute

1. Hold the wire with your hands.

2. Press both Earbuds Retract Buttons with your foreﬁngers.

3. Slowly retract the wire.

4. Press both Earbuds Retract Buttons again to let the rest of

the wire and earbuds to retract.

The correct way to retract the wire

To prolong the lifespan of the headset, please hold the wire with

your hands to make it retract slowly when you press both

Earbuds Retract Buttons. You can follow the steps shown below.

The wrong way to retract the wire

Directly press both Earbuds Retract Buttons. In this way, the

earbuds will hit the headset aggressively.