Owner's Manual

See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is

the key number of the part, from the PART LIST near the end of this manual. Important: Some small parts

may have been preattached. If a part is not in the hardware kit, check to see if it has been preattached.

M6 Washer (29)

M10 Nylon Locknut (32)

M8 Nylon Locknut (27)

M8 Washer (28)

M8 x 80mm Bolt (31)

M10 x 190mm Bolt (24)

M8 x 60mm Bolt (33)

M8 x 70mm Bolt (30)

M10 Washer (40)

M4 x 16mm Screw (25)

M6 x 35mm Screw (26)

PART IDENTIFICATION CHART