Owner's Manual

5. Attach the Bumper (16) to the Frame (3) with an
M4 x 16mm Screw (25).
Next, lubricate an M8 x 80mm Bolt (31) with part of
t
he included grease packet. Attach the Leg Lever
(6) to the Frame (3) with the Bolt and an M8 Nylon
Locknut (27). Do not overtighten the Nylon
Locknut; the Leg Lever must pivot easily.
3
6
1
6
25
31
27
5
8
6. Insert the Weight Tube (11) into the Leg Lever (6),
and attach it with an M8 x 60mm Bolt (33), a
Spacer (41), and an M8 Nylon Locknut (27).
7. Insert a Pad Tube (12) into the Frame (3). Slide
two Foam Pads (13) onto the Pad Tube. Then,
press two Pad Caps (37) into the Pad Tube.
3
13
37
13
37
12
33
27
41
G
rease
6
11
6
7
8. Insert two Pad Tubes (12) into the Leg Lever (6).
Slide two Foam Pads (13) onto each Pad Tube.
Then, press two Pad Caps (37) into each Pad
Tube.
6
8
12
12
37
37
37
13
13
13
13