Owner's Manual

9
9. Orient the Backrest Frames (7) as shown. Attach
t
he Backrest (8) to the Backrest Frames with four
M6 x 35mm Screws (26) and four M6 Washers
(
29).
D
o not tighten the Screws yet.
10. Lubricate an M10 x 190mm Bolt (24) with the
included grease packet. Attach the Backrest
Frames (7) to the Frame (3) with the Bolt, two
M10 Washers (40), and an M10 Nylon Locknut
(32).
Do not overtighten the Nylon Locknut;
the Backrest Frames must pivot easily.
See step 9. Tighten the M6 x 35mm Screws (26).
11. Attach the Seat (9) to the Frame (3) with two M6
x 35mm Screws (26) and two M6 Washers (29).
8
7
29
26
29
29
29
26
32
40
7
3
9
3
26
29
29
24
Grease
9
10
11
40