www.reebokfitness.com Model No. RBTL21908.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Customer Care. IMPORTANT: You must note the product model number and serial number (see the drawing above) before contacting us: 1-877-994-4999 CALL TOLL-FREE: Mon.–Fri. 6 a.m.–6 p.m. MT Sat. 8 a.m.–4 p.m. MT ON THE WEB: www.reebokservice.
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . .
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. 11.
22. Do not change the incline of the treadmill by placing objects under the treadmill. 18. The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed. 23. When folding or moving the treadmill, make sure that the storage latch is holding the frame securely in the storage position. 19. The pulse sensors are not medical devices. Various factors, including the user's movement, may affect the accuracy of heart rate readings.
BEFORE YOU BEGIN Thank you for selecting the revolutionary REEBOK® T 9.80 treadmill. The T 9.80 treadmill offers an impressive selection of features designed to make your workouts at home more enjoyable and effective. And when youʼre not exercising, the unique treadmill can be folded up, requiring less than half the floor space of other treadmills. ual. To help us assist you, note the product model number and serial number before contacting us.
ASSEMBLY To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton.
1. Make sure that the power cord is unplugged. 1 With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (51) so the treadmill is more stable. Do not fully fold the Frame until the treadmill is completely assembled. 88 Attach six Base Feet (86) and six Base Foot Spacers (85) to the Base (83) and the Extension Legs (88) in the locations shown with six #8 x 1" Tek Screws (4); do not overtighten the Tek Screws.
3. Identify the Right Upright (100), which is marked with a sticker. Have a second person hold the Right Upright near Base (83) as shown. 3 76 100 See the inset drawing. Tie the wire tie in the Right Upright (100) securely around the end of the Upright Wire (76). Then, pull the other end of the wire tie until the Upright Wire is routed completely through the Right Upright. 83 Wire Tie 77 76 Wire Tie 4. Orient the Right Upright (100) with the bend in the plate positioned as shown.
6. Set the console assembly face down on a soft surface to avoid scratching the console assembly. Identify the Right Handrail (102), which is marked with a sticker. Hold the Right Handrail near the console assembly. 6 Console Wire Hole 102 Console Assembly Next, insert the console wire into the large hole directly below the indicated hole in the Right Handrail (102) and out of the top as shown. 7. Locate the speed wire in the end of the Pulse Bar (99).
9. Press the Left Handrail Cover (95) upward against the console assembly. See the inset drawing. Align the lip on the Left Handrail Cover with the lip on the console assembly. Leave a small gap between the Left Handrail Cover and the console assembly. Make sure that no wires are pinched. Then, tighten the four #8 x 1/2" Screws (2) in the Left Handrail (94). Note: The Screws are preattached. 9 103 2 Attach the Right Handrail Cover (103) to the console assembly in the same way.
. Have a second person hold the console assembly near the Uprights (77, 100). 11 Connect the Upright Wire (76) to the console wire extending from the console assembly. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Remove the wire tie from the Upright Wire (76).
13. Attach the Right Bottom Handrail Cover (104) and the Left Bottom Handrail Cover (96) to the console assembly with four #8 x 3/4" Screws (1). 13 96 Console Assembly 1 104 1 14. Raise the Frame (51) to the position shown. Have a second person hold the Frame until this step is completed. 14 Orient the Storage Latch (80) so that the large barrel and the Latch Knob (81) are oriented as shown.
15. With the help of a second person, carefully lower the Uprights (77, 100). Firmly tighten the two 3/8" x 2 3/4" Bolts (7) and the two 3/8" x 1" Patch Bolts (8). Raise the Uprights to the vertical position. 15 77 8 100 8 7 7 16. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 26 and 27).
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with highperformance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD DANGER: Improper connection of the equipment-grounding conductor can result in an increased risk of electric shock.
CONSOLE DIAGRAM Audio Jack FEATURES OF THE CONSOLE cally control the treadmill while the voice of a personal trainer coaches you through every step of your workout. iFit cards are available separately. To purchase iFit cards at any time, go to www.iFit.com or call the telephone number on the front cover of this manual. iFit cards are also available at select stores. The treadmill console offers an impressive selection of features designed to make your workouts more effective and enjoyable.
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room temperature before turning on the power. If you do not do this, you may damage the console displays or other electrical components. Plug in the power cord (see page 14). Next, locate the reset/off circuit breaker on the treadmill frame near the power cord. Make sure that the circuit breaker is in the “reset” position. 1. Insert the key into the console.
5. Follow your progress with the displays. The matrix—When you select the manual mode, the matrix will display a track that represents 1/4 mile (400 meters). As you exercise, the indicators around the track will appear in succession until the entire track appears. The track will then disappear and the indicators will again begin to appear in succession. 6. Measure your heart rate if desired. Before using the handgrip pulse sensor, remove the sheets of clear plastic from the metal contacts.
HOW TO USE A SPEED WORKOUT each segment, a series of tones will sound and the next segment of the profile will begin to flash. If a new speed and/or incline setting is programmed for the next segment, the new speed and/or incline setting will appear in the displays for a few seconds and the treadmill will automatically adjust to the new speed and/or incline setting. 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 16. 2. Select a speed workout.
HOW TO CREATE A CUSTOM WORKOUT ment. To program speed and incline settings for the first segment, simply adjust the speed and incline of the treadmill as desired by pressing the speed and incline buttons. 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 16. When the first segment of the workout ends, a series of tones will sound and the current speed and incline settings will be saved in memory.
HOW TO USE A CUSTOM WORKOUT If desired, you can redesign the workout while using it. To change the speed setting or the incline setting for the current segment, simply press the speed or incline buttons. When the current segment ends, the new setting will be saved in memory. To increase the length of the workout, first wait until the workout is completed. Then, press the Start button and program speed and incline settings for as many additional segments as desired.
HOW TO USE AN IFIT WORKOUT press the button, the treadmill will automatically adjust to the first speed and incline settings of the workout. Hold the handrails and begin walking. 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 16. During the workout, a personal trainer will guide you through the workout. 2. Insert an iFit card and select a workout.
THE INFORMATION MODE The console features an information mode that keeps track of the total distance that the walking belt has moved and the total number of hours that the treadmill has been used. The information mode also allows you to select miles or kilometers to measure distance, and to turn on and turn off the display demo mode. To select the information mode, hold down the Stop button while inserting the key into the console and then release the Stop button.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown by the arrow at the right.
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. Pivot the frame downward and release the latch knob. Note: It may be necessary to push the frame forward as you pull the latch knob to the left. Frame Latch Knob 2. Hold the metal frame firmly with both hands, and lower it to the floor. CAUTION: To decrease the possibility of injury, do not lower the frame by gripping only the plastic foot rails.
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 14).
Remove the three indicated #8 x 3/4" Screws (1), and remove the Motor Hood (58). 58 Next, locate the Reed Switch (62) and the Magnet (48) on the left side of the Pulley (47). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8 in. (3 mm). If necessary, carefully insert a slotted screwdriver into the indicated hole and move the Reed Switch slightly.
PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt is off-center, remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller bolt clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left idler roller bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt.
EXERCISE GUIDELINES WARNING: Before beginning any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. The pulse sensor is not a medical device. Various factors may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general. These guidelines will help you to plan your exercise program.
PART LIST—Model No. RBTL21908.0 To locate the parts listed below, see the EXPLODED DRAWING near the end of this manual. Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 16 50 2 6 1 3 4 2 4 2 10 8 1 1 2 9 2 4 10 4 2 6 8 2 2 4 9 1 1 2 2 5 2 4 2 3 2 6 4 2 1 1 4 2 1 2 1 1 1 1 Description Key No. Qty.
Key No. Qty. 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 1 1 1 1 1 1 1 1 1 2 1 10 1 1 1 Description Key No. Qty.
53 30 20 116 55 15 19 31 2 17 41 33 13 40 34 14 50 42 19 34 30 56 15 31 78 19 54 78 43 2 2 19 18 33 17 52 20 53 16 19 2 44 43 19 51 18 45 18 24 47 46 40 19 48 43 2 16 19 44 43 18 23 2 24 49 EXPLODED DRAWING A—Model No. RBTL21908.
EXPLODED DRAWING B—Model No. RBTL21908.
EXPLODED DRAWING C—Model No. RBTL21908.
EXPLODED DRAWING D—Model No. RBTL21908.
EXPLODED DRAWING E—Model No. RBTL21908.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual.
