User`s manual

10
9. Press the Left Handrail Cover (95) upward
against the console assembly. See the inset
drawing. Align the lip on the Left Handrail
C
over with the lip on the console assembly.
Leave a small gap between the Left Handrail
C
over and the console assembly. Make sure
that no wires are pinched. Then, tighten the
four #8 x 1/2" Screws (2) in the Left Handrail
(94). Note: The Screws are preattached.
Attach the Right Handrail Cover (103) to the
console assembly in the same way.
Tighten two 1/4" x 1/2" Patch Bolts (3) into the
Handrails (94, 102) and the console assembly.
9
Console
Assembly
3
3
95
1
03
2
2
2
2
Lips
94
102
10. Identify the Left Accessory Tray (113) and the
Right Accessory Tray (114). Attach the
Accessory Trays to the console assembly with
eight #8 x 1/2" Screws (2).
2
10
2
Console
Assembly
114
113