Product Manual

Operating Instructions
Series L 3000 Spring Driven Cord Reels
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: [phone]
Customer Service: 855-634-9109 • [e-mail] • www.reelcraft.com
Form# 1308-2190 Rev: 5/2019
WARNING: Even low voltage can cause irreparable damage
or death! Exercise extreme caution while operating or
servicing this equipment.
IMPORTANT
Dimensions
Personal injury and / or equipment damage may result if proper
safety precautions are not observed.
• Ensure that only a qualified electrician installs / services
this equipment.
• Ensure that power supply voltage does not exceed maximum
voltage rating of reel.
• Ensure that reel is properly installed before connecting to power
supply.
• All cord reels with flying leads must be hard wired to ensure
proper function.
• Ensure that all electrical power is removed from reel before
servicing.
• A high-tension spring assembly is contained within the reel.
Exercise extreme caution.
• Check for frayed and/or broken wires before each use. Pull
electrical cord from reel by grasping the electrical cord itself,
not the work device.
• If an electrical malfunction should occur, remove power from
reel immediately.
• Ensure that reel, electrical cord, and equipment being serviced
are properly grounded. Use an ohmmeter to check ground
continuity.
• If reel ceases to unwind or rewind, remove power immediately.
Do not pull or jerk on electrical cord!
• Treat and respect the reel as any other piece of machinery,
observing all common safety practices.
Safety Precautions
L 3030 123 3 L 3030 123 7 L 3030 123 7Q L 3030 123 X
A 11 3/16”
B 11 1/16”
C 9 1/4”
D 8”
E 4 3/16”
F 6”
G 2 1/2”
B
A
F
G
D
E
C
Read this manual carefully before installing,
operating or servicing this equipment.
Optional Guide Arm Dimensions
A 11 5/8”
B 11 9/16”
B
A