User manual

49
11. Set the Shock Absorbers
The manufacturer has already chosen the best settings for the vehicle's shock absorbers; the shock ab-
sorbers usually do not need to be set.
If the shock absorber settings are changed, you must take off the car body.
Proceed as follows:
First switch off the vehicle's speed controller and com-
pletely disconnect the drive battery from the speed con-
troller.
Turn the vehicle around so that the bottom points up.
Removethe4screwsmarkedwithanarrowinthegure
on the right.
Remember the positions for these and the following
screws (if the screws differ).
Then turn the vehicle back around so that it is standing
on its wheels.
Now remove the screws at the left and right of the vehi-
cle’sfront;seegureontheright.
Now remove the screws at the left and right sides of the
vehicle;seegureontheright.
Last,removethescrewsatthetopofthevehicle;seeg-
ure on the right.