User manual

50
The car body can now be carefully lifted off upwards.
There is a connection cable to the LEDs between the chassis and the car body. Ensure that this is not
damaged or even torn off when taking off the car body!
The spring pre-tension of the front axle can be adjusted by
turning a knurled wheel (A).
Always set the shock absorbers evenly (at the left and
right wheels of the front axle). Otherwise, driving behav-
iourwillbeinuencednegatively.
The spring pre-tension of the rear axle can be adjusted
by turning a knurled wheel (B). With a little skill, the car
bodydoesnotneedtoberemovedforthis(seegureon
the right).
The shock absorber can also be installed in different loca-
tions at the upper end (C) or the lower end (D). The dif-
ferentgeometriesleadtodifferentdeectionbehaviours.
Always set the shock absorbers evenly (at the left and
right wheels of the rear axle). Otherwise, driving behaviour
willbeinuencednegatively.
After setting the shock absorbers, install the car body in the reverse order.