User manual

The throttle/brake lever controls the vehicle's drive.

Operate the throttle/braking lever for the drive function at the transmitter very cautiously and do not drive too

quickly at the beginning until you get used to the car's reactions. Do not make any quick and jerky move-

ments with the operating elements of the remote control.

When switching between forward and reverse gears, the throttle/brake lever at the transmitter must be put in the

neutralpositionbriey(neutralposition=letgooflever,donotmoveit).Ifthethrottle/brakeleveratthetransmitteris

moved from forward to reverse directly, the brake function of the drive is activated (vehicle will NOT reverse).

1. Let go of throttle/brake lever (neutral position); the vehicle rolls to a halt or does not move anymore (if necessary,

adjust the trim control for the driving function at the transmitter)

2. Drive forwards, slowly pull the throttle/brake lever towards the handle

3. Drive forwards and then brake (vehicle slows down; it does not roll to a halt slowly); push throttle/brake lever away

from the handle without stopping

4. Driveforwardsandthengointoreverse(waitbrieybetweenthechange(approx.1second)andleavethelever

in its neutral position!)

 Waitbriey(approx.1second)