User manual
64
14. Declaration of Conformity (DOC)
We, Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this product complies with
the fundamental requirements and the other relevant regulations of the directive 1999/5/EC.
The compliance statement for this product is available at www.conrad.com.
15. Troubleshooting
Even though the model and the remote control system were built with the latest available technology, there can still
be malfunctions or errors. For this reason, we would like to give you some information on how to deal with possible
problems.
The model doesn‘t respond or does not respond properly
• For2.4GHzremotecontrolsystems,thereceivermustbetaughttothetransmitter.Thisprocessmaybereferred
to by the terms of „Binding“ or „Pairing“. The teaching process usually was performed by the manufacturer already;
however, it can, of course, also be done by you. Also observe the separately enclosed operating instructions for the
remote control system.
• Isthereceiverpowersupplycorrectlyconnectedandactivated?
• Isthereceiverbatteryisweakordischarged?Chargethereceiverbatteryorreplaceitwithanew,fullycharged
one.
• Arethebatteriesorrechargeablebatteriesinthetransmitterweakorat?Replacethemwithnewbatteriesorfully
charged rechargeable batteries.
• Didyouswitchonthetransmitterrstandthenthereceiverpowersupply?Alwaysobservethisorder!
• Isthevehicletoofaraway?Withafullychargedreceiverbatteryandfullychargedbatteries/rechargeablebatteries
inthetransmitter,therangeshouldbeatleast50mandmore.Therangecanbedecreasedbyoutsideinuences,
e.g. transmitters working on the same or an adjacent frequency, (e.g. Bluetooth devices or WLAN hot spots), proxi-
mity to metal parts, trees, etc.
Thepositionoftransmitterandreceiveraerialtoeachotherverystronglyinuencesrange.Itisbestwhenboththe
transmitter and receiver aerial are vertical (both aerials are parallel to each other). If you point the transmitter aerial
at the vehicle, the range will be very short!
• Checkthecorrectpositionoftheservoplugsinthereceiver.Iftheplugsareinsertedrotatedby180°,theservoswill
not work.
• Arethesteeringservoandthrottle/brakeservoplugsconnectedtothecorrectchannel?Iftheplugswereswapped,
the throttle/brake lever at the transmitter will control the steering servo and the wheel will control the throttle/brake
servo.