User manual
58
The vehicle doesn‘t drive in a straight line correctly
• Setstraightdrivingatthetransmitterusingtherespectivetrimmingcontrolforthesteeringfunction.
• Checkthesteeringrods,theservoarm,theservosaveranditsscrewconnections.
• Didyourcarhaveanaccident?Ifso,checkthevehicleforanydefectiveorbrokenpartsandreplacethem.
Steering works opposite to the way the turning wheel is turned at the transmitter
• Activatethesteeringreversesettingatthetransmitter.
Driving works opposite to the movement of the throttle/brake lever at the transmitter
• Usually,thevehicleshoulddriveforwardsifyoupullthethrottle/brakeleveratthetransmittertowardsthehandle.
If this is not the case, activate the reverse setting for the driving function at the transmitter.
• Ifthemotorhasbeendisconnectedfromthespeedcontroller,swaptwoofthethreemotorcables.
Thesteeringisnotfunctioningorisfunctioningincorrectly,steeringdeectionatthevehicleinsufcient
• Ifthetransmitteroffersdualratesettings,checkthesesettings(observetransmitter’soperatinginstructions).Ifthe
dual rate setting is too low, the steering servo will no longer react.
• Checkthesteeringmechanicsforlooseparts;e.g.checkiftheservoarmisproperlyattachedtotheservo.
The white LEDs at the side of the roll-over bar are not lit.
• SwitchontheLEDsviatheassociatedon/offswitch.
• CheckthattheconnectionplugoftheLEDsisconnectedtothereceiverandwhetherthepolarityoftheplugis
correct (all black cables from the steering servo, speed controller and LED lamps point to one side).