User manual

19
The operating display consists of the following elements:
1 Model name
2 Model type gure
3 Battery symbol for transmitter voltage supply
4 Battery symbol for receiver voltage supply
5 Nod trimming display
6 Roll trimming display
7 Information area for status messages
8 Yaw trimming display
9 Distance display in „Following-Mode“
10 Pitch trimming display
11 Display for GPS reception of the transmitter*
* The display only appears when the GPS receiver has been connected to the transmitter.
If one of the three toggle switches (see gure 7, item 4,
18 and 19) is not in the front position, warning sounds
will be emitted when activating and the corresponding
note is displayed (see gure 11).
In this case, the affected switches must be put in the
required position. The display then switches to the
operating display and the warning sounds go out.
Figure 10
Figure 11