User manual
20
The operating display shown in gure 10 will only appear com-
pletely if the receiver system or quadrocopter is in operation as
well.
Pushing the button „UP“ or „DOWN“ calls two more display win-
dows alternatingly.
The rst window shows the following information:
• Flight altitude „Altitud“
• Flight battery voltage „Voltage“
• Number of received satellites „Satelli“
• Flight speed „Speed“
The second windows shows the following information:
• Geographic longitude „Lon“
• Geographic latitude „Lat“
• Flight mode
• „GPS Mode“
Example in gure 12:
The two upper gures show the displays without GPS reception
of the quadrocopter. The two lower ones represent a display with
GPS reception.
If the power supply is not sufcient for correct transmitter operation anymore, the battery icon will ash at a
voltage of less than 4.2 V and the transmitter emits acoustic warning sounds at regular intervals. The model
should then no longer be operated.
When the voltage drops below 4.0 V, the transmitter emits alarm sounds without interruption. In this case,
operation of the model must be ceased as quickly as possible. Insert new batteries for further operation of
the transmitter.
Figure 12