User manual

29
e) Setting the Toggle Switch
Before letting your model lift off for the rst time, check the switch
positions of the three toggle switches „IOC“ (also see gure 7,
item 18), „GO-HOME“ (see gure 7, item 19) and „GPS“ (also
see gure 7, item 4).
The switches must be in the front or upper position according to
the drawing in gure 22.
In this switch combination, the quadrocopter ies GPS-stabilised.
This switch position is ideal for the rst test ights outdoors.
If the quadrocopter is to be used indoors (e.g. in a hall or apart-
ment, etc.), the switch „GPS“ must be put in the bottom position
„GPS“ off).
Since operation indoors does not have GPS support, beginners and inexperienced model pilots should
initially only operate the quadrocopter outdoors and with GPS support.
For more information on this, see the following chapter 12.
The switches have the following functions:
Switch position
front/top
Switch position
Middle
Switch position
rear/bottom
Switch „IOC“ „IOC“ off „POI-Mode“ „Home Lock-Mode“
Switch „GO-HOME“ „Go-Home“ off - „Go-Home“ on
Switch „GPS“ „GPS“ on - „GPS“ off
For a precise description of the individual functions, see chapters 12 to 14.
Figure 22