User manual
38
When it is above the saved starting point, it will quickly reduce the ight altitude to 5 mm and hover for 3 - 5 seconds
before nally slowly reducing the remaining ight altitude until touching down.
Figure 30
Attention!
The „Go-Home“ function is tripped automatically when the quadrocopter no longer receives any valid remote
control signal. With the assistant software, which is available as a free download in the Conrad-Shop with
the product, you can set if the quadrocopter is to perform the „go-home“ function or hover in place when it
loses contact.
Important:
When the quadrocopter receives fewer than 6 satellites or is not in „GPS-Mode“, the „Go-Home“ function is
no longer available.
If the quadrocopter is in a difcult to control situation or very far away from the pilot‘s site, activate the return
function with the „Go-Home“ switch. Never switch off the transmitter.
Observe obstacles that may be in the way during the automatic return ight. The quadrocopter does not
have any automatic obstacle recognition.
When the quadrocopter has landed, switch off the drive motors.