User manual

41
18. Flight Space Limitation and Flight Prohibition Zones
The quadrocopter has a distance and altitude limitation that can be set individually with the assistant software. Ex
works, a maximum ight altitude of 120 m and a max. distance of 300 m are set.
If the distance limit is exceeded by more than 10 m, the quadrocopter will automatically return to the starting point.
Compliance with the max. distances only works, however, if the quadrocopter is operated in „GPS-Mode“ and has
enough satellite reception.
The quadrocopter also considers ight prohibition zones. Flight prohibition zones are areas in direct proximity to
airports, military systems and other protection-worthy facilities. The quadrocopter has a digital map in which these
zones are shown. In connection with its intelligent orientation function, the quadrocopter can tell when it enters a ight
prohibition zone if in „GPS-Mmode“. In this case, the status LEDs will ash red 10 x.
If the ight prohibition zone has been entered, the quadrocopter will no longer react to the ight altitude control. The
other control functions are fully retained. The quadrocopter reduces the ight altitude automatically with a dropping
rate of approx. 3 m/s until it either lands automatically or is steered from the ight prohibition zone.
Attention!
Compliance with ight prohibition zones can be switched off and on in the assistant software. We urgently
recommend not switching off this function, however.