User manual

b) Display Brightness „LCD brightness“

To have a perfectly legible display signals at all times, you can set the brightness value individually.

Setting the brightness value

• Switch on the transmitter and call the system setting menu.

• Move the cursor arrow to the menu item „LCD brightness“ with

the two buttons „UP“ and „DOWN“.

• Briey push the button „OK“ to activate the menu item.

The currently set brightness value is displayed with a nume-

ric value and a bar chart in the display. To better assess the

brightness settings, the quadrocopter is displayed as a model

icon at the lower display edge of the display as well.

• Push the buttons „UP“ or „DOWN“ to select the desired display

brightness now. If the button „OK“ is pushed and held, the fac-

tory parameters are called.

• Keep the button „CANCEL“ pushed for a longer period to save

the settings. The display then shows the system setup menu

again.

• Push the button „CANCEL“ repeatedly until you get back to

the operating display.

Figure 38