Instructions

31
WhentheightbatteryislowtheredandgreenLEDskeeponashing.Returntheracecopterimmediatelytoland
andrechargetheightbatteryaftera5to10minutecooling-offperiod.
The race copter is a powerful machine. You must move the left throttle control stick slowly to ensure that it
does not climb rapidly and cause a collision.
Low-voltage protection: the race copter is equipped with a system whereby the control system will cut the
power supply to the rotors, when the race copter battery level is low. In this case, the battery will have to
berechargedtoresumeying.
a) Flight controls
• Placetheracecopteronaatsurface.
• Turn on the transmitter. Set the ON/OFF switch (8) to position ON.
• Turn the left throttle/rudder control stick (1) downwards to the lowest position.
• TheracecopterwillbeeptwotimesandthePowerLED(2)willconstantlylightup.Thisconrmsthatbindingis
complete and the race copter is ready for take-off.
• Press the LED off button (4) to switch off the LEDs. Press the LED on button (3) to switch on the LEDs.
• Push the throttle/rudder control stick slowly forward. The propellers will start to rotate and the race copter will take
off.
• Accelerate the speed by pushing the throttle/rudder control stick slowly forward. Decrease the speed by pulling
throttle/rudder control stick backwards.
• Rotate the aircraft by moving the throttle/rudder control stick to the left or right.
• Move the aircraft forward by pushing the right elevator/aileron control stick (5) to the front. Move the aircraft
backward by pulling the elevator/aileron control stick to the back.
• Fly the aircraft to the left or right by moving the elevator/aileron control stick to the left or right.
b) Speed Selector
• The race copter has 2 speeds.
• Press the low speed button (6) or high speed button (7) to select the desired speed.
- One beep: low speed
- Two beeps: high speed
c) Manual and stabilize button
With the manual button (10) you can select a normal faster mode for experienced and skilled pilots. With the stabilize
button (11) you can select a more stable mode for beginners.
• Pressthemanualorstabilizebuttonatanytimebeforeorduringtheight.
• Themanualmodeletsyouytheracecopterfaster.
• The stabilize mode lets you hover the race copter more stable in the air and at a slower speed.