User manual

b) Plug-in Charger

• Use the enclosed plug-in charger only to charge the vehicle but never for any other purposes.

• The plug-in charger is constructed pursuant to protection class II.

• Use only a proper mains socket of the public supply mains for voltage/current supply of the plug-in charger.

• The socket to which the plug-in charger is connected must be easily accessible.

• Do not pull the plug-in charger from the mains socket at the cable. Take it at the side of the housing and pull it from

the socket then.

• The plug-in charger must not become moist or wet. Also do not place any containers lled with liquid, vases or

plants, on or next to the plug-in charger.

When these liquids get into the plug-in charger or the mains socket, the plug-in charger will be destroyed

and there is the highest danger of potentially fatal electric shock.

If the plug-in charger has become moist or wet or damaged, do not touch it. Danger to life from electric

shock!

First deactivate all sides of the mains socket to which the plug-in charger is connected (e.g. switch off the

respective fuse or turn out the fuse. Then deactivate the FI protection switch).

Then unplug the plug-in charger from the mains socket. Do not use the plug-in charger anymore, but dis-

pose of it environmentally compatibly.

• The plug-in charger is only suitable for charging the rechargeable battery installed in the vehicle. Never charge any

other rechargeable battery types or non-rechargeable batteries. There is great danger of re or explosion!

• The plug-in charger is intended for dry indoor use only. It must not become damp or wet. Avoid direct sun irradiation,

strong heat or cold. Keep the plug-in charger away from dust and dirt.

• Never cover the plug-in charger. Keep the plug-in charger away from ammable or easily inammable materials

(e.g. curtains).

• Do not use the plug-in charger inside a vehicle.

• Avoid operation in direct proximity of strong magnetic or electromagnetic elds, transmitter aerials or HF generators.

This can affect the control electronics.

• Never charge the battery in the vehicle unobserved.

• Do not wear any metal or conductive materials, such as jewellery (necklaces, bracelets, rings, etc.) while you are

working with the charger or batteries. Short-circuit poses a danger of burns and explosion.

• Never operate the plug-in charger immediately after it has been taken from a cold room to a warm room. The result-

ing condensation may lead to malfunctions or damage! Moreover, there is the risk of a fatal electric shock!

Allow the plug-in charger to reach room temperature before connecting and operating it. This may take several

hours!

• If you have reason to assume that safe operation is no longer possible, disconnect the plug-in charger immediately

and secure it against inadvertent operation.

First deactivate all sides of the mains socket to which the plug-in charger is connected (e.g. switch off the respective

fuse or turn out the fuse. Then deactivate the FI protection switch). Then unplug the plug-in charger from the mains

socket.