Information

ESC Type ESC Status LED Status Causes
The Red LED turns on solid.
You run your vehicle foward/backward or brake your vehicle with partial throttle (the
max. brake force & max. reverse force are not 100%).
The Red & Green LEDs turn on solid simultaneously.
You run your vehicle forward/backward or brake your vechile with full throttle (the max.
brake force & max. reverse force are 100%).
The Red LED flashes a short, single flash that repeats. The low-voltage cutoff protection is activated.
The Green LED flashes a short, single flash that
repeats.
The thermal/overheat protection is activated.
The Green LED flashes a short, triple flash that
repeats.
The over-current protection is activated, you can move the throttle trigger/stick to the
neutral/zero-throttle position to resume the power.
The Green LED flashes a short, tetrad flash that
repeats.
ESC faults, the unit needs to be returned to the factory for repair.
The Green LED flashes a short, pentad flash that
repeats.
The capactior thermal/overheat protection is activated.
RTR
brushless
In Operation