User manual

c) Wheel Change

Thetyresarexedtothewheelrimtopreventthemfrom

coming loose. When the tyre is worn down, the entire

wheel has to be replaced therefore.

Afterlooseningofthewheelnut(C)withasuitablesocket

wrench, the wheel can be removed from the wheel axle

(D).

Then the new wheel is plugged on so that the hexagon

socketonthewheelrim'sinsideispushedontothewheel

tappetnut(A)or(B)precisely.

Screw the wheel onto the wheel axle with the wheel nut

(C)removedatrst.However,donotapplyanyforcefor

screwing on. This will require greater force to turn the

wheel, which may damage the drive.

Ensurethatthetappetpin(E)isexactlyinthecentreofthewheelaxle(D)andinsertedintotherespectivegrooveof

thewheeltappetnut(A)or(B).

Ifthetappetpin(E)ismissing,notorquecanbetransferredfromthemotortothewheelandthewheelwillspinfreely.

Screwthewheelontothewheelaxlewiththewheelnut(C)removedatrst.However,donotapplyanyforcefor

screwing on. This will require greater force to turn the wheel, which may damage the drive.

 Thedeliveryincludesdifferentlywidewheeltappetnuts(A)and(B).Oneofthetwoversionsisalreadypre-

installed on the vehicle.

The wheel tapped nuts matching the rim used or the width of the car body must be used.