User manual

e) Setting the Fin

Yourmodelhasaninstalledontherightrear(gure4).Thisnisusedtooptimiseslidingandparticularlydirectional

stability of the model.

Figure 4

The model sliding properties depend on many factors. For example, the weight and installation site of the drive bat-

teryand/orthepropertiesofthewatersurface(manyorfewwaves)inuencethemodelslidingproperties.Therefore,

theseoperatinginstructionscantoofferspecicsettinginformation.Youneedtoperformoperationteststondthe

best settings.

Attention!

 Thenhassharpedgesandmaycausedamagetoobjectsand/orinjury!