User manual

43
11. Programming the Speed Controller
The speed controller is already perfectly adjusted to the motor ex works. For this reason, we recommend
that the ex-works programming not be changed.
Programming takes place via sound signals generated by brief triggering of the electric motor.
a) Available Programming Options
Function 1 2 3 4 5 6 7 8
Number of sounds 1x short 2x short 3x short 4x short 1x long 1x long
+ 1x short
1x long
+ 2x short
1x long
+ 3x short
1 - Driving mode Forward Forward/
reverse
2 - Number of LiPo
cells
Auto 2 cells 3 cells
3 - Undervoltage
recognition
Off 2.8 V/cell 3.0 V/cell 3.2 V/cell 3.4 V/cell
4 - Motor Timing 0° 3.75° 7.5° 11.25° 15° 18.75° 22.5° 26.25°
Function 1 "Driving mode"
This is where you determine driving mode: Forward = forward driving only; forward/reverse = forward and reverse
driving possible.
When switching from forward to reverse driving, the rotating direction of the motor is switched immediately. Therefore,
take in a short break between switching so that the drive is standing still. Otherwise, the drive will be subject to great
stress.
 Themodelship'sbuild(racingboatwithintegratedoodchannelforself-rightingaftercapsizing)makesit
unsuitableforreversing.Therearendwouldsubmerseandtheoodchannelwouldll.
Function 2 "Number of LiPo cells"
Attention!
The model ship and the integrated motor are only suitable for a 2- or 3-cell LiPo drive battery (or 6 - 9-cell
NiMH drive battery).
Never insert a drive battery with more cells. This would damage the drive/motor. Loss of warranty/guaran-
tee!
We recommend using a 3-cell LiPo rechargeable battery (rated voltage 11.1 V) with a capacity of at least
2200 mAh and a discharge rate of 25C.
Thisfunctionspecieswithwhichcellnumberofthedrivebatterythemodelshipisoperated.Thespecicationtoa
specicoperatingvoltage(LiPo2S=7.4Vratedvoltage;LiPo3S=11.1Vratedvoltage)isanundervoltagerecogni-
tionspeciedinthespeedcontroller(e.g.3.2V/cell).