User manual
31
• Before commissioning, check the trim button settings for direction control and adjust them if required.
• Always check the correct and secure position of the propeller before operation.
• Make sure that no objects, clothes or body parts are in the range or the suction area of the rotor while it is rotating.
c) During Operation
• Do not take any risks when operating the product! Your own safety and that of your environment depends completely
on your responsible use of the model.
• Improper operation can cause serious damage to people and property! Therefore make sure to keep a sufciently
safe distance to persons, animals or objects during operation.
• Select a suitable room or suitable ight area to operate your model. We recommend a warehouse or gym for your
rst ight attempts. If you use the model in the outdoor area, choose a perfectly windstill day.
• Only y your model if your ability to react is unlimited. The inuence of tiredness, alcohol or medication can cause
incorrect responses.
• Do not y directly towards audience or yourself.
• Motor, ight controller and ight battery may heat up during operation of the model. For this reason, wait for 5 to
10 minutes before recharging or replacing the ight battery. The drive motor must have cooled down to ambient
temperature.
• Never switch off the remote control (transmitter) while the model is in use. After landing, always disconnect the ight
battery from the model rst. Only then must be remote control be switched off.
• In case of defect or malfunction, remove the cause of the interference before starting your model again.
• Never expose your model or the remote control to direct sunlight or excessive heat for an extended period of time.
• After use, the ight battery must be disconnected from the model and the remote control switched off. Remove the
batteries from the transmitter for extended storage.