Instructions

32
3. Intended use
The product is an all-wheel model car which can be radio-controlled via the enclosed wireless remote control. The
control functions are forwards/backwards/left/right (each one continuous).
The integrated brushless motor is controlled via an electronic speed controller and the steering via a servo.
The vehicle (chassis and bodywork) is ready-to-run.
A suitable LiPo drive battery and a LiPo charger as well as 4 AA/Mignon batteries for the transmitter are included.
The product is not a toy and must be kept out of reach of children under 14 years of age.
Always follow the safety information in these operating instructions. They contain important information on
howtohandletheproductsafely.Readtheinstructionscarefullybeforeusingthevehicleforthersttime.
Failure to observe the instructions can result in numerous hazards (e.g. injury).
4. Delivery content
• Ready-to-run car
• Transmitter (remote control)
• Binding plug for receiver
• Aerial tube for receiver aerial
• Operating instructions for the vehicle
• Operating instructions for the remote control system (transmitter/receiver) on CD
• 2-cell LiPo drive battery (nominal voltage 7.4 V)
• LiPo charger
• Operating instructions for the LiPo charger
• 4 AA/Mignon batteries for the transmitter
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code on
this page. Follow the instructions on the website.