Instructions

40
b) Conguringthespeedcontroller
The speed controller features two jumpers that can be
usedtocongurethedrivingfunctionsandtherecharge-
able battery.
"Reverse"jumper(A):Herereversedrivingcanbeturned
off("Disable")oron("Enable").
"Battery"jumper(B):Setherewhichdrivebatteryiscon-
nected to the speed controller (LiPo or NiMH drive bat-
tery).
Important!
If you are using a LiPo drive rechargeable
battery and set the battery type to NiMH, the
battery will overdischarge and be permanently
damaged.
Always ensure that you select the correct bat-
tery type before driving the vehicle.
The "LiPo" setting reduces the engine power by 50%
when the battery voltage drops below 6.5 V.
With a battery voltage below 6.0 V, the speed controller switches off the engine. In this way, the LiPo battery is pro-
tected from harmful deep discharge.
The"NiMH"settingreducestheenginepowerwhenthebatteryvoltagedropsbelow4.5V.Theengineisswitchedoff
when the battery voltage drops below 4.0 V.
c) Inserting batteries/rechargeable batteries into the remote control
Open the battery compartment on the remote control and insert new or fully charged batteries. Ensure that the
batteries are inserted in the correct polarity (observe the positive/+ and negative/- markings). Replace the battery
compartment cover.
Read the remote control instructions included with the product.
d) Conguringtheremotecontrol
Switch on the remote control and set the steering and throttle trim to the central position. If the remote control has a
dual rate feature, disable it or adjust it so that the steering angle is not limited.
Read the remote control instructions included with the product.