Instructions

h) Controlling the vehicle

Close the body, see section 9. a). Place the vehicle on the ground. Do not reach into the engine or hold the wheels.

1. Releasethethrottle/brakelever(moveittotheneutralposition).Thevehicleshouldrolltoahaltorstaystationary

(if necessary, adjust the throttle trim on the remote control).

2. Slowly pull the throttle/brake lever towards the handle to make the vehicle move forwards.

3. Move the throttle/brake lever away from the handle without a pause to make the vehicle move forwards and brake

(the vehicle decelerates quickly rather than coming slowly to a standstill).

4. Drive forwards, brake and then drive in reverse: Push the throttle/brake lever away from the handle (braking) with-

outpausing;ifthevehicleremainsstationary,movethethrottle/brakelevertotheneutralpositionbriey(approx.

1 second), then push the throttle/brake lever away from the handle (vehicle will now reverse)

Drive forward Brake

If the vehicle is station-

ary, wait for a moment

(1 second)

Reverse

Pulling the throttle/brake lever from forwards to reverse without a pause will activate the brakes (the vehicle will not

reverse).

Intheeventofanimmediateswitchfromforwardstoreverse,thethrottle/brakelevermustrstbepushedawayfrom

the handle and then moved to the neutral position (if the vehicle moves forwards during this phase, braking is also

activated as a result). If the throttle/brake lever is pushed away from the handle a second time, the vehicle drives in

reverse.

After driving forwards, the vehicle only drives in reverse if the throttle/brake lever is pushed away from the

handleasecondtime.Thisisrequiredbythebrakefunction;inaddition,itprotectsthedrivemechanism

from overload due to an immediate switch from forwards to reverse.