Manual

Table Of Contents
34
15. SPEED button (press briey), HEADLESS MODE (keep pressed for 3 seconds)
12 Getting ready for ight
12.1 Charging the battery
Important!
Only use the supplied charger to charge the ight battery. Never attempt to charge the rechargeable battery
in the quadcopter with a different or unsuitable charger!
Always disconnect the battery and remove it from the quadcopter before charging.
Never recharge the rechargeable battery unattended!
Let the battery cool down after use before charging it again.
Caution! Do not connect the USB cable to a USB hub without its own power adaptor (e.g. a USB port on
a keyboard), as the charging current is not sufcient in this case. The USB port output current must be at
least 500 mA.
The operating system will not recognise any new hardware when the charging cable is connected, as the USB
port is only used for charging.
Please note that the USB ports on computers/laptop are normally only active when the computer/laptop is turned
on. We therefore recommend that you only connect the charging cable to the computer/laptop that is switched
on.
15