Manual
Table Of Contents
- 2 Einführung
- 3 Bestimmungsgemäße Verwendung
- 4 Merkmale und Funktionen
- 5 Lieferumfang
- 6 Neueste Informationen zum Produkt
- 7 Ersatzteile
- 8 Symbolerklärung
- 9 Sicherheitshinweise
- 10 Informationen und Sicherheitshinweise zu Batterien und Akkus
- 11 Bedienelemente und Komponenten
- 12 Flugvorbereitungen
- 13 Flugbetrieb
- 14 Nach dem Flug
- 15 Headless-Modus
- 16 360° Looping
- 17 Austausch der Rotorblätter
- 18 Reinigung und Pflege
- 19 Fehlerbehebung
- 20 Entsorgung
- 21 Konformitätserklärung (DOC)
- 22 Technische Daten
- 2 Introduction
- 3 Intended use
- 4 Features and functions
- 5 Delivery content
- 6 Latest product information
- 7 Spare parts
- 8 Explanation of symbols
- 9 Safety instructions
- 10 Battery information and safety
- 11 Controls
- 12 Getting ready for flight
- 13 Flight operation
- 14 Finished flying
- 15 Headless mode
- 16 360° looping
- 17 Replacing the propellers
- 18 Cleaning and care
- 19 Troubleshooting
- 20 Disposal
- 21 Declaration of Conformity (DOC)
- 22 Technical data
36
Place the battery in the battery holder.
Connect the battery plug to the dedicated con-
nector on the drone.
Replace the cover until it clicks into place.
Ensure the cover is properly locked in place by
gently sliding it back and forth.
Make sure you insert the battery into the drone just before the ight.
13 Flight operation
Important!
First and foremost, complete the steps listed in chapter “12. Getting ready for ight”.
Any time you disconnect the quadcopter battery, switch the transmitter power off and then repeat the
pairing process to re-establish the connection.
Check that all parts are working correctly and have no damage before ying.