Manual
Table Of Contents
- 2 Einführung
- 3 Bestimmungsgemäße Verwendung
- 4 Merkmale und Funktionen
- 5 Lieferumfang
- 6 Neueste Informationen zum Produkt
- 7 Ersatzteile
- 8 Symbolerklärung
- 9 Sicherheitshinweise
- 10 Informationen und Sicherheitshinweise zu Batterien und Akkus
- 11 Bedienelemente und Komponenten
- 12 Flugvorbereitungen
- 13 Flugbetrieb
- 14 Nach dem Flug
- 15 Headless-Modus
- 16 360° Looping
- 17 Austausch der Rotorblätter
- 18 Reinigung und Pflege
- 19 Fehlerbehebung
- 20 Entsorgung
- 21 Konformitätserklärung (DOC)
- 22 Technische Daten
- 2 Introduction
- 3 Intended use
- 4 Features and functions
- 5 Delivery content
- 6 Latest product information
- 7 Spare parts
- 8 Explanation of symbols
- 9 Safety instructions
- 10 Battery information and safety
- 11 Controls
- 12 Getting ready for flight
- 13 Flight operation
- 14 Finished flying
- 15 Headless mode
- 16 360° looping
- 17 Replacing the propellers
- 18 Cleaning and care
- 19 Troubleshooting
- 20 Disposal
- 21 Declaration of Conformity (DOC)
- 22 Technical data
40
Flight behaviour Trim
Æ Rotates left around its own axis
Press the rotate trim button (5) to counteract it.
Æ Rotates right around its own axis
Press the backward trim button (6) to counteract it.
13.6 Adjusting the speed
Important!
Change the speed before take-off or while hovering.
Do not adjust the speed while the quadcopter is moving.
A higher speed setting will cause the battery to run down faster.
It is recommended to y within large unobstructed areas before adjusting the speed.
First, learn to y at the lowest speed.
1. If adjusting before take-off, rst pair the quadcopter with the transmitter:
For details, see chapter “13.1 Pairing the transmitter with the drone”.
The transmitter LED (7) will be solid on when paired successfully.
2. Then, press the SPEED button (1) to cycle through the following speed settings:
Low 40% (1 beep) → Medium 60% (2 beeps) → High 100% (3 beeps).
Pressing the button again takes you back to the lowest speed setting 40% (1 beep).