Manual

42
15 Headless mode
Consider turning headless mode on if you are a novice operator.

Headless mode:
Left on the transmitter will turn the quadcopter left relative to your point of view.

Normal mode:
Left on the transmitter will turn the quadcopter left relative to the quadcopter point of view.
1. Pair the quadcopter. For details, see chapter “13.1 Pairing the transmitter with the drone”.
2. Press and hold the HEADLESS MODE button (1) for 3 seconds to activate headless mode.
Æ The transmitter will beep once.
Æ The quadcopter LED indicator turns red/green.
3. Holding the HEADLESS MODE button (1) for 3 seconds takes you back to normal mode.
Æ The transmitter will beep once.
Æ The red/green quadcopter LED goes off.
16 360° looping
Important!
There should be ≥ 2 m clearance from obstacles on all directions before performing manoeuvres.
The ight altitude should be at least 1.5 m.
1. Pair the quadcopter. For details, see chapter “13.1 Pairing the transmitter with the drone”.
2. Press the 360° STUNT button (8).
Æ The transmitter will beep once.
3. Push the right joystick in the direction you want to perform the loop.
Æ The quadcopter will then perform the loop and enter normal ight mode.
When the battery is empty, push the up/down joystick upwards to keep the drone in the air after the loop.