User manual

4
3. Intended Use
The2-channelremotecontrol„GT2EVO“issolelydesignedforprivateuseintheeldofmodelconstructionand
the operating times associated with it. This system is not suitable for industrial use, such as controlling machines or
equipment.
Any use other than that described above can damage the product and involves additional risks such as short circuit,
re,electricshock,etc.Theproductmustnotbetechnicallychangedorconverted!
Observe all safety information in these operating instructions. They contain important information on hand-
ling of the product.
You are solely responsible for the safe operation of your remote control and your model!
4. Product Description
The2-channelremotecontrolsystem„GT2EVO“isaradiocontrolsystemthatisidealforcontrollingmodelvehicles
ormodelships.Thedrivingandsteeringfunctionscanberemote-controlledseparatelyusingthetwoproportional
control channels. The ergonomic casing of the transmitter can be held and operated comfortably and allows you to
safely control the model.
Foroperation,4AA/mignonbatteries(e.g.Conraditemno.:652507,packof4,order1x)arerequiredforthetrans-
mitter.
Where no drive controller with BEC switch is used, you also need 4 AA/mignon batteries for the receiver (e.g. Conrad
item no. 652507, order once) or 4 AA/mignon rechargeable batteries with the corresponding battery/rechargeable
batteryholder.Alternatively,youmayalsousea4-or5-cellNiMHreceiverbattery.
5. Scope of Delivery
• RemoteControlTransmitter
• Remotecontrolreceiver
• Bindingplug
• Aerialtube
• Operatinginstructions