User manual

USER MANUAL
SENSORLESS BRUSHLESS SPEED CONTROLLER FOR CAR
DECLARATION
This is Electronic Speed Controller (ESC) for car. High power system for RC model is very dangerous, so
please read this manual carefully. Since we can’t control over the correct use, installation, application, or
maintenance of our products, we’ve no liability shall be assumed nor accepted for any damages, losses or
costs resulting from the use of the product. Any claims arising from the operating, failure of
malfunctioning etc. will be denied. We assume no liability for personal injury, consequential damages
resulting from our product or our workmanship.
FEATURES
1. Specially designed for RC car with excellent start-up, acceleration and linearity features.
2. Compatible with sensorless brushless motor.
3. The strong resistant current capability, excellent heat dissipation.
4. Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat
protection / Throttle signal loss protection / Motor blocked protection/
5. Easily programmed and compatible with pocket-sized program card.
6. Low Voltage Cut-Off: The function is mainly to prevent the lithium battery pack from over discharging.
When using lithium battery pack, please set the suitable value for low-voltage protection as your like.
WARNING: Never use the default value “Non-protection” for lithium battery! 3.1V2.9V2.7VNon-Protection
default value 3.1V
8. 3 start modes (Also called “Punch”) from “soft” to “very aggressive” default value Medium
9. Maximum brake force: 25A45A60A50%25%75%100%default value 50%80A
120A25%50%75%100%default value 25%
10. Maximum reverse force: 25%50%75%100%default value 25%
11: Neutral range: 9%(narrow)6%(Normal)12%(Wide) default value 9%
Specifications
Model 25A 45A 60A 80A 120A
Cont.
Current/
Burst Current
25A/100A
45A/180A
60A/320A
80A/480A 120A/600A
Motor Type
Sensorless Brushless Motor
Suitable Car
1/18, 1/16 car 1/10 car 1/10 car 1/8 car 1/8 car
Suitable
Brushless Motor
>=12T >=9T >=9T >=5.5T >=3.5
Resistance
0.004ohm 0.0014ohm 0.0007ohm 0.0005ohm 0.00035ohm
Battery
2 cells Lipo
4~6 cells NiMH
2~3 cells Lipo
4~9 cells NiMH
2~4 cells Lipo
4~12 cells NiMH
BEC Output
5V/2A
(analog mode)
5.8V/3A
(switch mode)
32.5*34*24mm
6.1V/3A
(switch mode)
Dimension
25*30*18mm 41*51*36mm

Summary of content (2 pages)