User manual

Setting Front Axle Camber:

Forsetting the camber,turn thescrew(A) of theupper

transverse link.

Asuitableopen-facedspanneroratplierscanbeusedfor

turning (not enclosed).

Because this screw has a left and right hand thread at ei-

ther end, the transverse link does not need to be disman-

tled for the camber to be adjusted.

Setting Rear Axle Camber:

Forsettingthecamber,twistthescrew(A)oftheupper

transverse link as for the front axle.

Asuitableopen-facedspanneroratplierscanbeusedfor

turning (not enclosed).

Because this screw has a left and right hand thread at ei-

ther end, the transverse link does not need to be disman-

tled for the camber to be adjusted.

Observe:

 • Changethesettingsonlygraduallyandthencheckthechangedrunningconducttoseeifitcorresponds

to your expectations. Write down the changes made so that you can easily reverse them again.

 • Twistthescrewsofthetwotransverselinksatthefrontaxleandtherearaxleevenlyatalltimes,since

different settings at the left/right wheel will cause unforeseeable driving behaviour.