User manual

56
15. Technical Data
a) Vehicle
Scale .....................................................1:10
Suitable drive batteries .........................6-cell NiMH drive battery (rated voltage 7.2 V) or
2-cell LiPo drive battery (rated voltage 7.4 V)
each with T-plug system
The enclosed plug-in charger is only suitable for charging 6-cell NiMH batteries.
Never use the plug-in charger for any other purpose. Never use the plug-in charger for charging LiPo
rechargeablebatteries(orotherrechargeablebatteriesthana6-cellNiMHrechargeablebattery);thereisa
dangerofreandexplosion!
Drive .....................................................Brushless electric motor, type 3650 (3000 KV)
Rear drive
Differential
Adjustable slip clutch
Electronic brushless speed controller
Undercarriage ....................................... Single wheel suspension, one shock absorber each (adjustable)
Wheel alignment of the front wheels can be set
 Front/rearwheelcambercanbeset
Dimensions (L x W x H) ........................380 x 250 x 130 mm
Tyre dimensions (W x Ø) ......................Frontwheels:30x82mm;rearwheels:40x89mm
Ground clearance .................................25 mm
Wheelbase ............................................268 mm
Weight ..................................................approx. 1600 g (incl. NiMH drive battery)
Small deviations in dimensions and weight are due to production technical reasons.
b) Plug-in Charger
Operating voltage .................................100 - 240 V/AC, 50/60 Hz
Output voltage ......................................max. 9 V
Output current .......................................max. 500 mA
Suitable for ...........................................NiMH drive battery with 6 cells
Never use the plug-in charger for any other purpose. Never use the plug-in charger for charging LiPo
rechargeablebatteries(orotherrechargeablebatteriesthana6-cellNiMHrechargeablebattery);thereisa
dangerofreandexplosion!