INSTRUCTION MANUAL
READ FIRST SAFETY GUIDLINES The following guidelines must be observed to ensure proper usage and safety. ⇒ READ ALL THE INSTRUCTIONS ⇒ Make sure that the electrical outlet you plug the machine into is securely grounded and away from the machine. Do not use any extension cord without a ground. Connect the motor power cord to a surge protected outlet or preferably a GFCI (Ground Fault Circuit Interrupter) outlet.
TABLE OF CONTENTS PARTS LIST……………………………………………………………….. 4 ASSEMBLY INSTRUCTIONS…………………………………………. 5 CONNECTING THE SINGLE-PASS WATER SYSTEM………… 6 FINAL ASSEMBLY……………………………………………………….. 7 MACHINE USAGE………………………………………………………. 8 THE ART OF CABBING……………………………………………….. 9 PARTS & MAINTENANCE……………………………………………. 10 TROUBLESHOOTING………………………………………………….. 14 WARRANTY INFO……………………………………………………….
PARTS LIST 1 2 7 3 8 4 9 5 10 6 11 12 15 16 14 13 26 17 28 18 27 25 Part # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 24 23 Description GOGGLE PAN SPLASH GUARD HAND REST STONE TRAY FLANGE WRENCH FLANGE KEY PUMP DRIP TUBE INTAKE TUBE DIAMOND PASTE APRON HOOD SPLASH GUARD WHEEL SPLASH GUARD HOOD 21 22 QTY Part # 1 4 2 2 1 1 1 2 1 1 1 2 2 2 15 16 17 18 19 20 21 22 23 24 25 26 27 28 4 20 19 Description SPOT LIGHT MOTOR POLISHING PAD PAN 3000# RESIN WHEEL 1200# RESIN WHEEL 600# RESIN WHEEL B
ASSEMBLY INSTRUCTIONS WATER FLOW CONTROL KNOBS SPOT LIGHT STONE TRAY SPLASH GUARDS SIDE PANEL HAND REST ON/OFF SWITCH DRIP PAN FIG. A Refer to picture above for assembly. 1. Determine a suitable location to place the CABKING-6V3. The CABKING-6V3 weighs about 45lbs. so you will need a sturdy table or stable surface that has approximately 3 feet width by 2 feet depth of clear space. Try to find a well lit area so you can clearly see what you are grinding. 2.
7. Finally, you can optionally attach the side panels to the hoods. These are magnetically attached to the hood to make it easy to remove them. Twist the side spray tubing upwards to easily attach and remove the panels. The purpose of the side panels is to control splash, so you may prefer not to use them for easier access to the diamond lap and polishing pad. FIG. B CONNECTING THE SINGLE-PASS WATER SYSTEM The CABKING-6V3 water system is single-pass meaning non-recirculating.
FINAL ASSEMBLY 12. Make sure the power switch on the motor is in the off position. Connect the motor power cord to a surge protected outlet or preferably a GFCI (Ground Fault Circuit Interrupter) outlet. While not necessary, a GFCI is recommended to prevent electric shock and can be purchased at your local hardware store. Though the motor is sealed, you must make sure to keep all electrical connections dry. 13.
MACHINE USAGE The CABKING-6V3 is an universal grinder/polisher for gemstones. It is configured with 2 hard diamond electroplated wheels, 4 resin diamond wheels, 1 full face diamond flat lap, and 1 canvas polishing disc for use with the included diamond compound. The motor on the CABKING-6V3 is direct drive which means a smaller, compact unit with no belts or other parts to maintain or replace. The water system on the CABKING-6V3 is unique and allows you to independently control water spray on the wheels.
Note: The supplied resin wheels are designed to work exclusively together in sequence To avoid scratching or other problems, you should change all the resin wheels if you plan on using different brands. Using diamond paste for polishing will finish the process for most stones, resulting in a bright shiny cabochon, however there are many other polishing powders and pastes available.
PARTS & MAINTENANCE The CABKING-6V3 is designed as a maintenance free unit. There are no belts, pulleys, gears, or other parts to actively maintain. All parts should be cleaned manually. Changing Wheels—The diamond wheels supplied with the machine are 6” x 1.5” with a 1” arbor. The CabKing works with any style of wheel that is 1” arbor. Please note that our resin wheels are designed to work exclusively together in sequence. For best results, you should change all the resin wheels if you FIG. M FIG.
CABKING WATER SYSTEM PARTS NEEDLE TUBING. 1/4” VALVE OUTER DIAMETER BY 1/8” INNER Y-SPLIT THREADED–T THREADED–L NOZZLE (2pc) DIAMETER PARTS AND TUBING CAN BE REMOVED BY EITHER PULLING APART OR UNSCREWING. CONTACT YOUR DEALER FOR ADDITIONAL PARTS AND TUBING. Water System—One of the key features to the CABKING-6V3 is the single pass, contamination free water system. All parts of the water system will remain trouble free as long as you use a fresh, clean supply of water.
Motor—The CABKING-6V3 comes with a 1/4 HP, single phase, 1800RPM, 110/115Volt, 60 HZ, ball bearing, AC motor. The motor is totally enclosed and non ventilated, which means it is sealed to protect itself from dust, water and other particulates. However, since it is enclosed it will become very hot, so follow the safety guidelines and avoid touching the motor. The motor warranty is 1 year free of material defects from the date of purchase.
Flange— The flange is located on the inside of the left shaft closest to the motor. The flange is used to hold the shaft while removing and securing wheel assemblies. If the flange becomes loose, use the included flange key to tighten it (FIG. U). FIG. U Knobs—These knobs can be removed by unscrewing the brass screw located on the side. Spacers—These are aluminum rings supplied on the wheel assemblies to create proper distance between wheels. See Changing Wheels for more info.
TROUBLESHOOTING PROBLEM RECOMMENDED SOLUTION PARTS MISSING OR DAMAGED CONTACT YOUR DEALER FOR REPLACEMENTS MOTOR MAKES A HIGH PITCH SOUND THIS IS TYPICALLY DUE TO THE TABLE OR PLATFORM THAT THE CABKING6V3 IS PLACED ON. THE BASEBOARD OF THE CABKING-6V3 CAN SOMETIMES VIBRATE THE PLATFORM, WHICH ACTS AS AN AMPLIFIER OF THE MOTOR SOUND. THE BEST SOLUTION IS TO FIND A SURFACE THAT ABSORBS THE VIBRATION. YOU CAN ALSO PLACE SOME CARDBOARD OR CLOTH UNDER THE MACHINE TO ABSORB THE VIBRATION.
ONE YEAR LIMITED WARRANTY The CABKING-6V3 is warranted by REENTEL International Inc. to be free from defect for the period of one year from the date of purchase. What does this warranty cover? This warranty covers all parts of the CABKING-6V3, including the motor and pump, excluding the light bulb.
