Instruction manual

SAFETY GUIDLINES

The following guidelines must be observed to ensure proper usage and

safety.

⇒ READ ALL THE INSTRUCTIONS

⇒ Make sure that the electrical outlet you plug the machine into is se-

curely grounded and away from the machine. Do not use any exten-

sion cord without a ground. Connect the motor power cord to a surge

protected outlet or preferably a GFCI (Ground Fault Circuit Interrupter)

outlet. While not necessary, a GFCI is recommended to prevent elec-

tric shock and can be purchased at your local hardware store. Though

the motor is sealed, you must make sure to keep all electrical connec-

tions dry. Never disconnect the motor or pump with wet hands and

avoid touching the pump when connected to the power.

⇒ Wear the enclosed safety goggles to protect from any debris that may

fly out while grinding. Do not wear loose clothing or clothing that can

become entangled with the wheels.

⇒ Some rocks contain poisonous elements such as uranium, mercury,

lead, arsenic, etc. Be certain you are not grinding material that exhib-

its this trait.

⇒ Make sure there is adequate water used while grinding so that rock

dust is not formed. This dust can be hazardous to your lungs if in-

haled.

⇒ Avoid contact with the motor housing when in use. The motor is to-

tally enclosed and lubricated which results in a high temperature.

⇒ You must be focused and alert when grinding. It is possible for stones

to catch on the wheels and be ejected out of the grinding area.

READ FIRST