Other Content
March 15, 2011
lnstallation lnstructions
lnstrucciones de instalación
Directives de montage
VEHICLE'S CONNECTOR
FUNCTIONS OF WIRING ADAPTER
TRAILER'S PLUG
CCP P/N
7-Way Blade, RV Type
7-Way Blade To 4-way Flat
4-way Flat
74607
7-Way Blade To 4-way Flat with LED tester
78116
7-Way Blade To 4-way Flat, Retractable
78007
7-Way Blade To 4-way Flat Tow-Glo
78117
7-Way Blade To 6-way Round
6-way Round Pin
85216
74685
Combo 7-Way Blade To 6 way Round with Back-up alarm
74680
Combo 7-Way Blade To 7-way Blade with Back-up alarm
7-way Blade
74679
Combo 7-Way Blade To 4 & 5 way Flat with Back-up alarm
4-way or 5-way Flat
74678
Combo 7-Way Blade To 4 & 5 way Flat
85212
Combo 7-Way Blade To 4 & 5 way Flat with LED tester
78118
Combo 7-Way Blade To 4 & 5 Flat with LED tester & 12V outlet
78119
Combo 7-Way Blade To 6-way Round & 4 Flat with LED tester
6-way Round Pin or
4-way Flat
85350*
Plug wiring adapter into tow vehicle side connector to allow electrical connections between 7-way Blade Receptacle with variety of the
trailer Plugs.
NOTE:
Wiring Adapters equipped with the built-in LED circuit testers will confirm that each connection is operating properly. Refer to the LED lights
diagram shown.
READ THIS FIRST:
Read and follow all instructions carefully
before beginning installation.
LISEZ CECI EN PREMIER:
Lire et suivre toutes les instructions
attenrivement avant le montage.
LEA ESTO PRIMERO:
Lea y siga todas las instrucciones
cuidadosa-mente antes de iniciar la
instalación.
WARNING
All connections must be complete to function properly. Test and verify installation with a test
light, circuit tester or trailer once installed.
WARNING
Overloading circuit can cause fires. DO NOT exceed lower of towing manufacturer rating or:
Max. Right Turn, Left Turn, Stop, & Tail Light Circuits: (7.5 amps)
Max. (+) Battery, Reverse, and Electric Brake Circuits: (30 amps)
Read vehicle's owners manual & instruction sheet for additional information. Additional fusing
maybe required.
7-WAY Blade Wiring Adapters
WIRING ADAPTER
TRAILER’S
PLUG
TOWING
VEHICLE
CONNECTOR
WIRING ADAPTER WITH
LED CIRCUIT TESTER
L - Left Turn and Stop
Intermitente izquierdo y freno
Clignotant et feu d’arrêt gauches
R - Right Turn and Stop
Intermitente derecho y freno
Clignotant et feu d’arrêt droits
T - Tail Lights
Luces traseras
Feux arrière
WIRING
ADAPTER
Instant switch
12V or Brake Center Pin
P/N 85350
INSTANT SWITCH INSTRUCTIONS *:
1. Determine which circuit is located on the center pin of the
6-PIN Trailer Connector (either BRAKE or Auxiliary).
2. Slide switch on bottom of Adapter to match with the trailer
Center Pin function.
3. Test connections to be sure all circuits are connected
properly before towing.