User Manual

7. Attach rear rail brackets to rear rail angle using 5/8” X 4” (three) bolts, 5/8” X 1 1/2” bolt, lock washers, flat washers,

and welded nuts on rear rail angle (Figure 13). Use the 1 1/2” bolt for attaching the passenger side bracket inside

location. Tighten bolts to hand tight. First torque driver side bolts to 180 ft.lbs. then torque passenger side to 180

ft. lbs.

5/8” X 4” hex head bolts

3 places

5/8” washers

5/8” lock washers

4 places

5/8” X 1 1/2” hex head bolt

Rear rail bracket

2 places

Figure 13

8. Loosely attach frame brackets to rails using 5/8” X 1 1/2" long bolts, flat washer & lock washers, (Figure 14).

Front of

vehicle

5/8” lock washer

4 places

Figure 14

5/8” X 1 ½” bolts

4 places

5/8” flat washer

4 places

Front of

vehicle

9. Align holes in frame bracket with mounting holes in chassis rails (Figure 15). Remove jounce block from chassis

frame rails above axle.

Front of

vehicle

Figure 15

Jounce Block

Mounting holes