Owners manual

PCN7559 SWWIN REV C PRINTED IN MEXICO 5/6/16
SIDEWINDER
TM
WEDGE
INSTALLATION INSTRUCTIONS
1. Verify the part number with shipping paper work. Verify that the wedge is named for your 5
th
wheel
hitch or you have the universal wedge.
2. Verify that you also have two (2) 5/8 bolts and two (2) 5/8 conical washers.
3. With the truck unhooked from the unit bolt the wedge to the Sidewinder. The wedge needs to be
positioned with the narrow end towards the front of the unit and the recessed area downward. The recessed
area is for socket head clearance to the bolts. Install bolts hand tight including the conical washers, then
slide the wedge to the rear most position of the slot.
Caution DO NOT position yourself or others under the trailer kingpin area or
between the truck and trailer during coupling or uncoupling. Serious injury or
death may occur.
If it is necessary to place any part of your body under the trailer or between truck
and trailer:
All tires MUST be blocked in front and behind AND
Trailer landing gear MUST be resting on firm ground AND
Truck MUST be stationary, in park, with emergency brake on
4. Hook the truck to the unit. Back straight into the Sidewinder. Make sure hitch jaws close. Pull
forward slightly to align truck, Sidewinder and 5
th
wheel in a straight position. Set brakes, turn off truck
and lower trailer landing gear to the ground.
5. Slide wedge forward to make contact in to the 5
th
wheel hitch head. A slight tapping on the rear of the
wedge with a hammer may help with this step.
6. Torque the wedge bolts to 150 ft. lbs.
7. Unhook the truck from the unit. Apply a small amount of grease to sides of the wedge block. This will
allow a much easier hook-up.
8. Connect the Sidewinder to your hitch in back of the truck making sure hitch jaws close. Back straight
into Sidewinder. Caution DO NOT position yourself or others under the trailer kingpin area
during coupling or uncoupling. Serious injury or death may occur.
Cequent Performance Products
47912 Halyard Drive Suite 100
Plymouth, MI 48170
1-800-632-3290

Summary of content (1 pages)