Digital Viewer IITM Digital Microscope Image Editing and Measurement Software User Manual Version: 2.1.1.
DIGITAL VIEWER IITM DIGITAL MICROSCOPE ...................................................................... 1 IMAGE EDITING AND MEASUREMENT SOFTWARE .......................................................... 1 USER MANUAL ........................................................................................................................ 1 Open the Measurement Software ........................................................................................................ 3 Calibration: ...............
Open the Measurement Software 1. Select an image in preview browsing folder and right clicking the mouse, then pop-up the context menu as below: Click “ Measure” Note: The measurement function only can work in resolution 1600x 1200 pixels.
Click the “Measure” key, then the measurement feature will open as below: Run the Semiautomatic Calibration before using the Digital Viewer II Digital Microscope to measure your image.
Calibration: 1. Click Calibration icon “ ”, and set the magnification to 50x for standard. 2. Put the Digital Viewer II microscope on the Calibration Pattern sheet, you can see the black/white block on the screen.
3. Align the Calibration pattern block (black and white) to the white rectangle edge. (To push the “ PgUp” key to enlarge the white rectangle or push the “PgDn” to shrink the white rectangle.
Push “PgDn” key to shrink the white rectangle 4. There are 5 blue rectangles in the inside of big white rectangle, and all blue rectangles have one red point. When the 5 red points align on the cross point of black and white block, Please click ”OK” or press ”enter” key to run Calibration.
Operation Guide for Drawing with Measurement Click to define the “size” and “color” of line on left of the image window like below: Click to select one of the drawing tools on tool-bar below of the image window by drawing, and then start the drawing in image window. Execute the drawing as per the type of TOOL selected. To show the measurement data on the image, left click again on the image where you would like the data to be displayed.
Tool bar description Open: open a file (“bmp” format is supported), which you want to edit or measure. Save: save the operating picture in the picture folder. Print: print the current picture on the current state. Undo: back to the previous drawing state. Redo: forward to the next drawing state. Text: allow to key in text into picture. Line: draw line and measure the length.
Anticlockwise: allow to anticlockwise the picture in the editing window. Sets font: selecting the fonts, size or colors on character. Calibration: semiautomatic calibration by Calibration pattern sheet. Magnify: key the correct magnification in the block according the “A” Roller indication.
Dynamic Measurement (Real-Time Measurement) (V 2 Ver. ) 1. Measure the Line(Length) , Circle(Radius, Area),Rectangle(Width, Height, Area), Angle and Polygon(Area) in preview. Full Range Measurement Calibration: (V 2 Ver. ) 1. Key in the scope indication Magnification on magnification window before calibration.
2. Select suitable scale pattern size: a. 5.0 mm Calibration Pattern : 10X ~ 70X 5mm Calibration Pattern b. 2.5 mm Calibration Pattern: 55X ~ 130X c. 1.0 mm Calibration Pattern: 110X ~ 230X 1.0mm and 2.
3. Align the Calibration pattern block (black and white) to the white rectangle edge. (To push the “ PgUp” key to enlarge the white rectangle or push the “PgDn” to shrink the white rectangle.
Push “PgUp” key to enlarge the white rectangle 4. There are 5 blue rectangles in the inside of big white rectangle, and all blue rectangles have one red point. When the 5 red points align on the cross point of black and white block, Please click ”OK” or press ”enter” key to run Calibration.
5. Using metal high end stand(optional) to get the 50X~230X magnification: For the standard scope can get 10X~50X and 230X, removing the cover tip to get the 50X ~ 230X Magnification.
Digital Viewer IITM Digital Microscope User’s Manual Welcome Thank you for choosing Digital Viewer IITM digital microscope! The Digital Viewer IITM digital microscope is an exciting new device to clear micro objects and has a wide applications, such as, Industrial Inspection Computer Parts Inspection Telecom Module Inspection Scientific Teaching Tool Medical Analysis School Research Tool Insect Dissection / Examination Plant Dissection / Examination Skin Examination Textile Inspection
Please read this manual carefully before using Digital Viewer IITM Digital Microscope.
Digital Viewer IITM Digital Microscope ____________________________________ 1 User’s Manual________________________________________________________ 1 Welcome ____________________________________________________________ 1 Please read this manual carefully before using Digital Viewer IITM Digital Microscope.
Product Specifications Operation system: Windows XP/Vista and Windows 7 PC interface: USB 2. 0 interface Image Sensor: 1/3.2 inches Effective Pixels: 1600(H)x1200(V), 1280(H)x1024(V), 640(H)x480(V), 320(H)x240(V) Frame Rate: 1600 x1200/15ftps or 640 x480/30ftps Magnification: 10X -230X(17”LCD display) White Balance: Auto. Exposure: Auto Illumination: 8 white adjustable LEDs Power Consumption:Max.0.
Package Contents The Digital Viewer II digital microscope package includes the following: 1. 2. 3. 4. 5. 6. 7. Digital Viewer II Digital Microscope Device CD (Driver) Tripod Stand),Brick Stand Travel bag Calibration pattern(5mm) x 2pcs, Calibration pattern(2.5mm&1.0mm) x 1pcs Dust cover x2pcs Gift Box System Requirements PC’s system requirements: 1) 2) 3) 4) 5) 6) 7) OS: Windows XP /Vista and windows 7 CPU: Pentium IV 1.0G, Celeron, AMD Athlon or above CD-ROM driver Available USB2.
Recommended specification for performance: 1) 2) 3) 4) 5) 6) 7) OS: Windows XP SP2 or Vista SP1 or above CPU: Core2- 2.0GHz or , AMD Athlon 64x2- 2.0GHz above CD-ROM driver Available USB 2.0 port 1.
Installation the Digital Viewer II Application Software 1. Place the installation CD into CD-ROM drive, the installation program should be started automatically. Otherwise, please execute the Digital Viewer II.EXE directly from the CD. 2. Press the key “Install Software”, you will see the following popup .Press “Next” to proceed or “Cancel” to abort installation.
3. You will see the End User License Agreement. If you accept the License Agreement, then you can Click the “Next” button which is available to process, or “Cancel” to abort installation. 4. You will be able to install the application. Click “Install” to start to install, click “Cancel” button, it will abort installation. Click on “Back” if you wish to read the End User License Agreement again.
5. You will see the following progress bar below indicating that the installation is proceeding. If click “Cancel” button, it will abort installation. 6. Wait until you see the following popup and press “Finish” button.
7. Please also install “ffdshow”. And press “Next” to complete the installation. 8. Please plug USB cable to Digital Viewer II digital microscope Device to connect with PC. System will automatically search and install the driver. Wait until you see this message that system show “Your new hardware is installed and ready to use”. Now the software installation was completed, you can use Digital Viewer II digital microscope.
Digital Viewer II Digital Microscope Connection The following procedure will show you how to properly connect Digital Viewer II digital microscope with your PC.
Digital Viewer II Digital Microscope Operation The following process will show you how to operate Digital Viewer II digital microscope. i. To have a right image, suggest holding Digital Viewer II digital microscope as shown: ii. iii. Put the to-be-observed object near the Digital Viewer II digital microscope, the distance between both (object distances) don’t exceed to 15CM. Adjust the focus: Use any finger to rotate the “A” roller as shown, till the image is vivid. ”A” Roller iv. v.
Digital Viewer II Application Software Note: Before start Digital Viewer II, please make sure Digital Viewer II digital microscope has been connected to PC via USB line Double-Click Digital Viewer II icon on desktop , the Digital Viewer II main screen will be shown as below: 13
Tool Bar Description 1. : Two statuses as below: Real-time images show on Preview area under the microscope viewing. Ready to view Pictures or video has been taken. 2. : Take Picture 3. : Take Video 4. : Take time lapsed Pictures 5. : Setting--Picture and Video setting 6. : Save as--A took-picture can be saved as “jpg”, “bmp”, ”png” or ”gif” to your specified disk.. 7. : Email 8. :Language 9. : About 10.
Take Video The Video can be taken by clicking icon on Tool bar. (Note: This is Video folder as below). Recorder setting: 1. Frame rate: it is the number of frames or images that are projected or displayed per second. The number range is 1~30 2. Timer limit: it is the time of video recording to avoid video file size exceed to the space of disk. The number range is 1~99999 3. Stop: it is available to stop the video recording before the timer setting.
Setting You can select video resolution and set the parameter of video properties by click the button. Save as You can select a picture or video in Picture/Video folder, then click the Icon of Tool Bar, the file can be saved as “jpg”, “bmp”, ”png” or ”gif” picture or video to your specified disk. Show as below.
Email You can send a selected picture or video as email attachment to other guy by clicking the Icon of Tool Bar.
Language You can click the icon to change the Application panel display language. About You can click the icon of Tool Bar for help. It will pop the following message: About Digital Viewer II: you can check your present version via it as below shown: Full Screen Display and Return These displays of real time preview or picture view/video playback can be enlarged to full screen by clicking the icon on right-top of program screen or double-clicking the left key of mouse in a site of the preview area.
Menu Function List 1. Add in cross line/coordinates/circles/timer on preview area: The mouse stay in the preview area, then click the right key and pop the menu as below. You can click the item you want. You also can capture the picture with cross line/coordinates/circles/timer mark. 2. Select a file in picture/video folder, then clicking the right key of mouse and pop the menu as below.
Note: Open-- use “paint” to open it for picture file; use “windows media player” to open it for video file.
: Zoom In :Zoom Out Video Playback You can double-click the selected video in video folder to play back it as below shown 21
: Play/Pause : Stop : Open a avi file : Start : Last 22
Troubleshooting Common Fix A. If Digital Viewer II device and Digital Viewer II application were working OK and suddenly stops working properly, Please try the following: 1. 2. 3. 4. Unplug or Power off Digital Viewer II device from PC Close Digital Viewer II program After waiting for 1 minute, plug or power on Digital Viewer II device open Digital Viewer II program B.
Execute “Digital Viewer II” application Program. b. Please check: open Digital Viewer II->setting to see if “Device name” item has an optional device. Q5. How to uninstall driver and Digital Viewer II software? A: In order to uninstall driver and Digital Viewer II software, click on the uninstall utility from the Start button ->Control Panel -> Add or Remove Programs. Q6. When connecting to PC, why the real-time display is slow or unsmooth? A: a. Probably your PC’s configuration is not sufficient enough.