User`s manual

ENGLISH
19
ENGLISH
18
b. Open the lm holder by pulling down on the tab
from the bottom center of the holder. Lift the front
part of the holder. The top side of the holder
is marked with white arrows.
Loading 135 lm into the holder
a. Orient lm strip based on the example
graphic “abc” on the holder.
135 lm holder
abc
ab
c
ab
c
Pull
down
White arrows
ab
c
Lift
open
e. Place the lm holder into the scanner from the left or right side into the small
opening (lm/scanner holder). Make sure that the orientation of white arrows
on the holder correspond with the triangle mark on the scanner.
c. lnsert the orientated lm negative into the holder
between the horizontal guides. Carefully line up
the dividers on the lm negative with the dividers
on the holder.
Loading 135 lm into the holder (continued)
Horizontal
guides
Dividers
d. Close the holder and push the tab to the closed position.
ab
c
ab
c
Push to closed
position
ab
c