User`s manual

ENGLISH
33
ENGLISH
32
d. Preference
Attribute setting windows.
Menu Commands [Full]
Menu Commands - Scan (full)
a. Prescan
Prescan the existing lm.
b. Scan
1. Scan Selected to File… > Scan the selected lm to a specied path.
2. Enter the le name.
2-1. Trailing Index after Base File Name
• Digits: Denes the length of the le name and numbering
sequence up to 6 digits Example image1 or image000001.
• Options:
• Use Film Index: Use the number assigned to the lm frame.
• User Dened Start Number: Enter a specic start number.
2-2. Choose the le type , “TIFF” or “JPG”. (TIF uncompressed or JPG
Compressed)
2-3. Choose image quality for JPEG. (Good, Better, or Best)
c. Revert
Discards all modications and restores the image back to the original state.
e. Exit/Quit
Closes the CyberView X user interface.
A message pop-up will appear “Would you like to apply current scan
resolution to default?“ click “Yes“ to save , “No“ to discard the current setting
or “Cancel“ to return to CyberView X.
1. Scan Settings
1-1. “Prescan Resolution“ - Default pre-scan resolution.
320dpi vs 640dpi prescan resolution: the 640dpi produces a larger
prescanned image in the CyberView window
NOTE: Higher prescan resolution results in longer prescanning time.
1-2. “Using default scan resolution“ - Enables default scan resolution
setting (1000dpi).
1-3. “Color Depth“ – Default color depth while scanning.
8 bit = 3 channel RGB at 8 bits (each equal to 24 bit color mode),
16 bit = 3 channels RGB at 16 bits (each equal to 48 bit color mode).
1-4. “Scan Mode“ – Default scan mode while scanning.
(Quality mode = slower scanning speeds and better quality scans).