User manual

-
10-
3) scan option: “slide” ，“negative”and “B&W negative”, which stand respectively for
positive , negative and back and white negative films, from which users may select according
to their requirements. Color Depth is set as 24, which is unchangeable. Dpi stands for photo
resolution which provides 1800 and 3600 as an option. In practical application, photos with
1800 resolution offers the size of 2520* 1680（pixels）and 3600 5040* 3360（pixels）.
NOTE: if the photos you take give obvious dead pixels, you can clear them in two ways.
1）First remove the film clip，then click to calibrate it.
2）Cleaning the dust from the film scanner lens
4. When the above settings are over, click ‘Acquire’ at the lower right corner on the interface
of Acquire from Scanner, from where you get to the following shooting window shown as
bellow.
5. Insert the loaded film jacket into the device，a corresponding films preview will appear in the
shooting window.