Pro Residential, Post Frame and Metal Building Applications

Recommended Products:

Staple Tab, Reflective/Bubble/Bubble/Reflective - Roll: ST24100 (24”x 100’), ST48100 (48”x 100’)

Bottom of the Trusses

Open Interior

R-10* Heat Flow Down (and a Radiant Barrier) | R-3.7* Heat Flow Up

Please Note: In addition to the stated R-value, this application also provides a Radiant Barrier.

As a result, a 96% reduction of the radiant energy that ordinarily would be transmitted to the interior of the building is blocked.

Installation Instructions:

• Pre-installation inspection - Check the roof area for clutter, water sprinklers, conduit and lights.

Sprinkler systems are especially important. All water pipes must be below the Reflectix

Reflective/Bubble/Bubble/Reflective, Staple Tab product to prevent the possibility of freezing in the

winter.

• Nail 1”x 2” furring strips on the bottom of and perpendicular to the trusses on 22” centers. (Note:

When truss spacing is 24” it is recommended to install the Reflectix

24” or 48” product directly to

the bottom cord of the truss.)

1. Reflectix

Insulation

2. Exterior Roof Panel

3. Purlin

4. Truss

5. 1”x 2” (Nominal)

Furring Strip

Tools Required:

Safety Glasses

Tape Measure

Utility Knife

Staple Gun

PF Bldg / Roof / Retro / Bottom of Trusses

Reflectix

Installation Instructions