Installation Instructions

Reflectix
®
Concrete
Slab Insulation
White Poly
Foil
Clear Poly
Bubbles
Clear Poly
Bubbles
Clear Poly
Technical Data:
Temperature Range: -60 degrees to +180 degrees F
Nominal Thickness: 5/16 inch (.312)
Weight: 1.25 oz./sq. ft.
Linear Shrinkage: None
Water Vapor Transmission (ASTM E 96): 0.02 Perms
Puncture Resistance: 60 lb./in.
Mold and Mildew: No Growth
Tensile Strength: 3.7 N/mm
Pliability: No Cracking
Physical Properties - Compression 6%
Pictured to the Right:
Under a Concrete Slab (Top)
Radiant Heating in a Concrete Floor (Bottom)
Benefits:
• R-Value 1.1
• Enhances Radiant Floor Systems
• Vapor Retarder
• Non-Toxic/Non-Carcinogenic
• Fiber Free
• Radon Retarder
• Installs Quickly and Easily
• Lightweight and Clean
• Not Affected by Moisture/Humidity
• No Nesting Characteristics for Insects
• No Need for Protective Garments or
Respirators When Installing
Reflectix
®
Concrete Slab Insulation consists of seven layers. The
first layer of white poly is bonded to foil to protect from lime in
curing concrete. Each outer layer is bonded to a tough layer of
polyethylene for strength. Two inner layers of insulating bub-
bles resist conductive heat flow while a center layer of polyeth-
ylene gives Reflectix
®
high reliability and strength.
Uses:
• Insulation (and a Vapor Moisture Retarder) Under a
Concrete Slab
• Insulation Under a Radiant Floor System (in a Slab)
• Insulation Under a Snow Melt System (in a Slab)